R0106-HP MSR Router Series IP Multicast Command Reference(V7)

277
[Sysname-pim6-mvpn]
ipv6 pim bfd enable
Use ipv6 pim bfd enable to enable BFD for IPv6 PIM.
Use undo ipv6 pim bfd enable to disable BFD for IPv6 PIM.
Syntax
ipv6 pim bfd enable
undo ipv6 pim bfd enable
Default
BFD is disabled for IPv6 PIM.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
You must enable IPv6 PIM-DM or IPv6 PIM-SM on an interface before you execute this command.
Examples
# On the public network, enable IPv6 multicast routing, enable IPv6 PIM-DM on interface
GigabitEthernet 2/1/1, and enable BFD for IPv6 PIM on the interface.
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6] quit
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] ipv6 pim dm
[Sysname-GigabitEthernet2/1/1] ipv6 pim bfd enable
Related commands
• ipv6 pim dm
• ipv6 pim sm
ipv6 pim bsr-boundary
Use ipv6 pim bsr-boundary to configure an IPv6 PIM domain border (a bootstrap message boundary).
Use ipv6 pim bsr-boundary to remove the configured IPv6 PIM domain border.
Syntax
ipv6 pim bsr-boundary
undo ipv6 pim bsr-boundary
Default
No PIM domain border is configured.