R0106-HP MSR Router Series IP Multicast Command Reference(V7)

279
ipv6 pim hello-option dr-priority
Use ipv6 pim hello-option dr-priority to set the DR priority for an interface.
Use undo ipv6 pim hello-option dr-priority to restore the default.
Syntax
ipv6 pim hello-option dr-priority priority
undo ipv6 pim hello-option dr-priority
Default
The DR priority is 1.
Views
Interface view
Predefined user roles
network-admin
Parameters
priority: Sets a DR priority, in the range of 0 to 4294967295. A larger value represents a higher priority.
Usage guidelines
You can set the DR priority in IPv6 PIM view or interface view. The configurations made in IPv6 PIM view
are effective on all interfaces. The configurations made in interface view are effective on only the current
interface. If you set the DR priority in both IPv6 PIM view and interface view, the configuration in interface
view always takes precedence.
Examples
# Set the DR priority to 3 on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] ipv6 pim hello-option dr-priority 3
Related commands
hello-option dr-priority (IPv6 PIM view)
ipv6 pim hello-option holdtime
Use ipv6 pim hello-option holdtime to set the IPv6 PIM neighbor lifetime on an interface.
Use undo ipv6 pim hello-option holdtime to restore the default.
Syntax
ipv6 pim hello-option holdtime time
undo ipv6 pim hello-option holdtime
Default
The IPv6 PIM neighbor lifetime is 105 seconds.
Views
Interface view