R0106-HP MSR Router Series IP Multicast Command Reference(V7)

285
Default
IPv6 PIM-SM is disabled.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
You must enable IPv6 multicast routing in the public network or VPN instance before you execute this
command.
Examples
# On the public network, enable IPv6 multicast routing, and enable IPv6 PIM-SM on GigabitEthernet
2/1/1.
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6] quit
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] ipv6 pim sm
Related commands
ipv6 multicast routing
ipv6 pim state-refresh-capable
Use ipv6 pim state-refresh-capable to enable the state refresh feature on an interface.
Use undo ipv6 pim state-refresh-capable to disable the state refresh feature.
Syntax
ipv6 pim state-refresh-capable
undo ipv6 pim state-refresh-capable
Default
The state refresh feature is enabled.
Views
Interface view
Predefined user roles
network-admin
Examples
# Disable state refresh on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] undo ipv6 pim state-refresh-capable
Related commands
• state-refresh-hoplimit (IPv6 PIM view)