R0106-HP MSR Router Series IP Multicast Command Reference(V7)

31
• igmp-snooping max-response-time
• igmp-snooping querier
• max-response-time
igmp-snooping report source-ip
Use igmp-snooping report source-ip to configure the source IP address for IGMP reports in a VLAN.
Use undo igmp-snooping report source-ip to restore the default.
Syntax
igmp-snooping report source-ip ip-address
undo igmp-snooping report source-ip
Default
In a VLAN, the source IP address for IGMP reports is the IP address of the current VLAN interface. If there
is no IP address for the current VLAN interface, the source IP address is 0.0.0.0.
Views
VLAN view
Predefined user roles
network-admin
Parameters
ip-address: Specifies an IP address. It can be any legal IP address.
Usage guidelines
You must enable IGMP snooping for a VLAN before you execute this command for the VLAN.
Examples
# In VLAN 2, enable IGMP snooping, and configure the source IP address for IGMP reports to 10.1.1.1.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping report source-ip 10.1.1.1
Related commands
igmp-snooping enable
igmp-snooping router-aging-time
Use igmp-snooping router-aging-time to set the aging timer for the dynamic router ports for a VLAN.
Use undo igmp-snooping router-aging-time to restore the default.
Syntax
igmp-snooping router-aging-time interval
undo igmp-snooping router-aging-time