R0106-HP MSR Router Series IP Multicast Command Reference(V7)

34
Related commands
source-deny (IGMP-snooping view)
igmp-snooping special-query source-ip
Use igmp-snooping special-query source-ip to configure the source IP address for IGMP group-specific
queries for a VLAN.
Use undo igmp-snooping special-query source-ip to restore the default.
Syntax
igmp-snooping special-query source-ip ip-address
undo igmp-snooping special-query source-ip
Default
If the IGMP snooping querier has received IGMP general queries, the source IP address of IGMP
group-specific queries is the source IP address of IGMP general queries. Otherwise, the source IP address
of IGMP group-specific queries is the IP address of the current VLAN interface. If there is no IP address for
the current VLAN interface, the source IP address is 0.0.0.0.
Views
VLAN view
Predefined user roles
network-admin
Parameters
ip-address: Specifies an IP address.
Usage guidelines
You must enable IGMP snooping for a VLAN before you execute this command for the VLAN.
Examples
# In VLAN 2, enable IGMP snooping, and configure the source IP address of IGMP
g r o u p - s p e c i f i c- q u e r i e s a s 10 .1.1.1.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping special-query source-ip 10.1.1.1
Related commands
igmp-snooping enable
igmp-snooping static-group
Use igmp-snooping static-group to configure a port as a static member port of a multicast group.
Use undo igmp-snooping static-group to restore the default.
Syntax
igmp-snooping static-group group-address [ source-ip source-address ] vlan vlan-id