R0106-HP MSR Router Series IP Multicast Command Reference(V7)

44
Multicast routing and forwarding commands
In this chapter, "MSR2000" refers to MSR2003. "MSR3000" collectively refers to MSR3012, MSR3024,
MSR3044, MSR3064. "MSR4000" collectively refers to MSR4060 and MSR4080.
delete ip rpf-route-static
Use delete ip rpf-route-static to delete all static multicast routes.
Syntax
delete ip rpf-route-static [ vpn-instance vpn-instance-name ]
Views
System view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify any VPN instance, the command deletes all static multicast
routes on the public network.
Usage guidelines
This command deletes all static multicast routes, but the undo ip rpf-route-static command deletes a
specific static multicast route.
Examples
# Delete all static multicast routes on the public network.
<Sysname> system-view
[Sysname] delete ip rpf-route-static
This will erase all multicast static routes and their configurations, you must reconfigure
all static routes.
Are you sure?[Y/N]:y
Related commands
ip rpf-route-static
display mrib interface
Use display mrib interface to display information about the interfaces maintained by the MRIB, including
PIM interfaces, IGMP interfaces, register interfaces, InLoopBack0 interfaces, and null0 interfaces.
Syntax
display mrib [ vpn-instance vpn-instance-name ] interface [ interface-type interface-number ]
Views
Any view