R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

81
[Sysname-GigabitEthernet2/1/3] qinq enable
[Sysname-GigabitEthernet2/1/3] display qinq
Interface
GigabitEthernet2/1/1
GigabitEthernet2/1/3
Table 26 Command output
Field Descri
p
tion
Interface Interface name.
GigabitEthernet2/1/1 QinQ-enabled interface.
Related commands
qinq enable
qinq enable
Use qinq enable to enable QinQ on an Ethernet interface.
Use undo qinq enable to restore the default.
Syntax
qinq enable
undo qinq enable
Default
QinQ is disabled on Ethernet interfaces.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Examples
# Enable QinQ on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] qinq enable
Related commands
display qinq
qinq ethernet-type customer-tag
Use qinq ethernet-type customer-tag to configure the TPID value in CVLAN tags.
Use undo qinq ethernet-type customer-tag to restore the default TPID value in CVLAN tags.
Syntax
qinq ethernet-type customer-tag hex-value
undo qinq ethernet-type customer-tag