R0106-HP MSR Router Series Layer 2 - LAN Switching Configuration Guide(V7)

92
How ports of different link types handle frames
Actions Access Trunk H
y
brid
In the
inbound
direction for
an untagged
frame
Tags the frame with the
PVID tag.
• If the PVID is permitted on the port, tags the frame with the PVID
tag.
• If not, drops the frame.
In the
inbound
direction for
a tagged
frame
• Receives the frame if
its VLAN ID is the
same as the PVID.
• Drops the frame if its
VLAN ID is different
from the PVID.
• Receives the frame if its VLAN is permitted on the port.
• Drops the frame if its VLAN is not permitted on the port.
In the
outbound
direction
Removes the VLAN tag
and sends the frame.
• Removes the tag and sends
the frame if the frame carries
the PVID tag and the port
belongs to the PVID.
• Sends the frame without
removing the tag if its VLAN
is carried on the port but is
different from the PVID.
Sends the frame if its VLAN is
permitted on the port. The
tagging status of the frame
depends on the port hybrid vlan
command configuration.
Assigning an access port to a VLAN
You can assign an access port to a VLAN in VLAN view or interface view.
Make sure the VLAN has been created.
Assigning one or multiple access ports to a VLAN in VLAN view
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter VLAN view.
vlan vlan-id N/A
3. Assign one or a group of
access ports to the VLAN.
port interface-list
By default, all ports belong to
VLAN 1.
Assigning an access port to a VLAN in interface view
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter Layer 2 Ethernet interface
view.
interface interface-type
interface-number
N/A
3. Configure the link type of the
port as access.
port link-type access By default, all ports are access ports.
4. (Optional.) Assign the access
port to a VLAN.
port access vlan vlan-id
By default, all access ports belong to
VLAN 1.