R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

136
isdn number-property
Use isdn number-property to set the number type and numbering plan identification for calling or called
numbers in incoming or outgoing ISDN calls.
Use undo isdn number-property to restore the default.
Syntax
isdn number-property number-property [ calling | called ] [ in | out ]
undo isdn number-property [ calling | called ] [ in | out ]
Default
The system automatically selects a number type and numbering plan appropriate to the upper-layer
service.
Views
ISDN interface view
Predefined user roles
network-admin
Parameters
number-property: Specifies the type and numbering identification plan of ISDN numbers, a hexadecimal
string in the range of 0 to 7F. In binary form, the string contains 8 bits:
• Bits 1 through 4 represent the numbering identification plan.
• Bits 5 through 7 represent type of the number.
• Bit 8 is reserved for extension.
Table 25 thr
ough Table 30 show the ISDN number type and numbering plan identification bitmaps for
different ISDN protocols.
calling: Specifies calling numbers.
called: Specifies called numbers.
in: Specifies incoming ISDN calls.
out: Specifies outgoing ISDN calls.
Table 25 ISDN number type and numbering plan identification bitmap for AT&T
Ext
Type of
number
Numbering
plan
identification
Information element
Type of number
Numbering plan
identification
8 7 6 5 4 3 2 1
0 0 0 0 Calling party number N/A Unknown
0 0 0 1 Calling party number N/A
ISDN/telephony
numbering plan
(Recommendation
E.164)
0 0 1 1 Calling party number N/A
Data numbering plan
(Recommendation
X.121)