R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

145
Examples
# Configure BRI 2/4/0 as the network side.
<Sysname> system-view
[Sysname] interface bri 2/4/0
[Sysname-Bri2/4/0] isdn protocol-mode network
isdn protocol-type
Use isdn protocol-type to configure the ISDN switch type on an ISDN interface.
Use undo isdn protocol-type to restore the default.
Syntax
isdn protocol-type protocol
undo isdn protocol-type
Default
The ISDN switch type is DSS1 for both BRI and PRI.
Views
ISDN interface view
Predefined user roles
network-admin
Parameters
protocol: Specifies an ISDN switch type. Available options include 5ess, ansi, at&t, dss1, etsi, ni, ni2, ntt,
and qsig. To specify ANSI, AT&T, ETSI, NI, or NTT, you must make sure the interface is operating on the
user side.
Usage guidelines
You can configure this command only when no call is present on the ISDN interface.
ISDN service providers in different countries implement variants of ISDN to provide varied ISDN services.
When you configure an ISDN interface, you must set the switch type on the interface to be the same as
the service provider switch type.
Table 32
shows the ISDN switch types available on an ISDN interface.
Table 32 ISDN switch type and ISDN interface compatibility matrix
Switch type BRI CT1/PRI CE1/PRI
ANSI Yes Yes No
AT&T No Yes No
5ESS No Yes No
DSS1 Yes Yes Yes
ETSI Yes Yes Yes
NI Yes No No
NI2 No Yes No