R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

165
Field Descri
p
tion
OAM AIS State
AIS alarm state:
• No AIS Alarm—No OAM AIS alarm.
• E2E AIS Alarm—End-to-end OAM AIS alarm.
If alarm state is supported, this command displays only the alarm
state, rather than the number of cells in the F5 AIS field.
OAM RDI State
RDI alarm state:
• No RDI Alarm—No OAM RDI alarm.
• E2E RDI Alarm—End-to-end OAM RDI alarm.
If alarm state is supported, this command displays only the alarm
state, rather than the number of cells in the F5 RDI field.
OAM CC State
CC alarm state:
• No CC Alarm—No OAM CC alarm.
• E2E CC Alarm—End-to-end OAM CC alarm.
display atm pvc-info
Use display atm pvc-info to display PVC information.
Syntax
display atm pvc-info [ interface interface-type { interface-number | interface-number.subnumber } [ pvc
{ pvc-name | vpi/vci } ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type { interface-number | interface-number.subnumber }: Specifies an interface by its
type and number. Both ATM interfaces and ATM subinterfaces are supported.
pvc: Displays information about a PVC.
pvc-name: Specifies a PVC by its name, a case-sensitive string of 1 to 15 characters excluding slashes (/)
and hyphens (-). For example, neither 1/20 nor a-b is a valid PVC name.
vpi/vci: Specifies a PVC by its VPI and VCI values. The value range for the vpi argument is 0 to 255. The
value range for the vci argument depends on the interface type. For more information, see Table 40. T
he
values of the vpi and vci arguments cannot be 0 at the same time. HP recommends not using VCI values
0 through 31 because they are reserved for special purposes.
Usage guidelines
If you do not specify an ATM interface, this command displays brief information about all PVCs on all
ATM interfaces.
If you specify an ATM interface but do not specify a PVC, this command displays brief information about
all PVCs on the specified ATM interface.