R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

170
Virtual-Ethernet2/4/1
Current state: UP
Line protocol state: UP
Description: Virtual-Ethernet2/4/1 Interface
Bandwidth: 20000kbps
Maximum Transmit Unit: 1500
Internet protocol processing: disabled
IP Packet Frame Type:PKTFMT_ETHNT_2, Hardware Address: 00e0-fc0d-9485
IPv6 Packet Frame Type:PKTFMT_ETHNT_2, Hardware Address: 00e0-fc0d-9485
Last clearing of counters: Never
Last 300 seconds input rate: 0 bytes/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 packets/sec
Carrier Layer: 1 PVC total, 1 map up, 0 map down
Input:
0 packets, 0 bytes, 0 drops
Output:
0 packets, 0 bytes, 0 drops
# Display brief information about VE interface Virtual-Ethernet 2/4/1.
<Sysname> display interface virtual-ethernet 2/4/1 brief
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
VE1 DOWN DOWN --
# Display information about all VE interfaces in physically down state and the causes.
<Sysname> display interface virtual-ethernet brief down
Brief information on interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
VE2/4/1 DOWN Not connected
Table 38 Command output
Field Descri
p
tion
Current state
Physical state of the interface:
• Administratively DOWN—The interface is shut down with the
shutdown command.
• DOWN—The interface is administratively up but physically down
(probably because no physical link is available or the link has failed).
• UP—The interface is both administratively and physically up.
Line protocol state Link layer protocol state of the interface: UP or DOWN.
Internet protocol processing Internet protocol processing state of the interface.
IP Packet Frame Type
Encapsulation format for IPv4 packets. PKTFMT_ETHNT_2 stands for
Ethernet II frame format.
IPv6 Packet Frame Type Encapsulation format for IPv6 packets.
Hardware Address MAC address of the interface.