R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

228
Syntax
profile delete profile-number
Views
Cellular interface view
Predefined user roles
network-admin
Parameters
profile-number: Specifies a profile by its number. The value is in the range of 1 to 255.
Examples
# Delete the profile for Cellular 2/0/0.
<Sysname> system-view
[Sysname] controller cellular 2/0/0
[Sysname-Cellular2/0/0] profile delete 1
Related commands
• display cellular
• profile create
profile main
Use profile main to specify the primary and backup profiles for 3G or 4G modem dialup.
Use undo profile main to restore the default.
Syntax
profile main profile-M-number backup profile-B-number
undo profile main
Default
Profile 1 is used for 3G or 4G modem dialup.
Views
Cellular interface view
Predefined user roles
network-admin
Parameters
main profile-M-number: Specifies the primary profile by its number.
backup profile-B-number: Specifies the backup profile by its number.
Usage guidelines
The primary profile always has priority over the backup profile. For each dialup connection establishment,
the 3G or 4G modem uses the backup profile only when it has failed to dial up using the primary profile.
This command takes effect only on dialup connections initiated after the command is configured. It does
not take effect on a dialup connection that has been established.