R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

239
Views
Eth-channel interface view
Predefined user roles
network-admin
Parameters
size: Sets the MTU in bytes. The value is in the range of 128 to 2000.
Examples
# Set the MTU for Eth-channel 2/0/0:0 to 1430 bytes.
<Sysname> system-view
[Sysname] interface eth-channel 2/0/0:0
[Sysname-Eth-channel2/0/0:0] mtu 1430
reset counters interface
Use reset counters interface to clear the statistics on the specified or all Eth-channel interfaces.
Syntax
reset counters interface [ eth-channel [ channel-id ] ]
Views
User view
Predefined user roles
network-admin
Parameters
eth-channel: Specifies Eth-channel interfaces.
channel-id: Specifies an Eth-channel interface by its number.
Usage guidelines
Use this command to clear history statistics if you want to collect traffic statistics for a specific period.
• If you do not specify an interface type, this command clears statistics on all interfaces.
• If you specify the eth-channel keyword without specifying the channel ID, this command clears
statistics on all Eth-channel interfaces.
• If you specify both the eth-channel keyword and the channel ID, this command clears statistics on
the specified Eth-channel interface.
Examples
# Clear the statistics on Eth-channel 2/0/0:0.
<Sysname> reset counters interface eth-channel 2/0/0:0
shutdown
Use shutdown to shut down an Eth-channel interface.
Use undo shutdown to bring up an Eth-channel interface.