R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

27
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
description: Displays interface description information. This keyword does not apply to VA interfaces
because VA interfaces do not support description configuration.
down: Displays information about interfaces in physically down state and the causes. If you do not
specify this keyword, the command displays information about all interfaces.
Usage guidelines
If you do not specify the virtual-access keyword, the command displays information about all interfaces
on the device.
If you specify the virtual-access keyword without the interface-number argument, the command displays
information about all VA interfaces.
Examples
# Display information about interface Virtual-Access 1.
<Sysname> display interface virtual-access 1
Virtual-Access1
Current state: UP
Line protocol state: UP
Description: Virtual-Access1 Interface
Bandwidth: 1920kbps
Maximum Transmit Unit: 1500
Hold timer: 10 seconds
Internet Address is 122.1.1.1/24 Primary
Link layer protocol: PPP
LCP: opened, MP: opened, IPCP: opened
Physical: MP, baudrate: 1920000 bps
Main interface: Virtual-Template1
Output queue - Urgent queuing: Size/Length/Discards 0/100/0
Output queue - Protocol queuing: Size/Length/Discards 0/500/0
Output queue - FIFO queuing: Size/Length/Discards 0/75/0
Last clearing of counters: Never
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Input: 2 packets, 24 bytes, 0 drops
Output: 2 packets, 24 bytes, 0 drops
# Display brief information about interface Virtual-Access 1.
<Sysname> display interface virtual-access 1 brief
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
VA1 DOWN DOWN --
# Display brief information about VA interfaces in physically down state and the causes.
<Sysname> display interface virtual-access brief down
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause