R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

Usage guidelines

If you do not specify the virtual-template keyword, the command displays information about all

interfaces on the device.

If you specify the virtual-template keyword without the interface-number argument, the command

displays information about all existing VT interfaces.

Examples

# Display detailed information about interface Virtual-Template 1.

<Sysname> display interface virtual-template 1

Virtual-Template1

Current state: DOWN

Line protocol state: DOWN

Description: Virtual-Template1 Interface

Bandwidth: 100000kbps

Maximum Transmit Unit: 1500

Hold timer: 10 seconds

Internet Address: 6.1.1.2/8 Primary

Link layer protocol: PPP

LCP: initial

Physical: None, baudrate: 100000000 bps

Output queue - Urgent queuing: Size/Length/Discards 0/100/0

Output queue - Protocol queuing: Size/Length/Discards 0/500/0

Output queue - FIFO queuing: Size/Length/Discards 0/75/0

# Display brief information about Virtual-Template 1.

<Sysname> display interface virtual-template 1 brief

Brief information on interface(s) under route mode:

Link: ADM - administratively down; Stby - standby

Protocol: (s) - spoofing

Interface Link Protocol Main IP Description

VT1 DOWN DOWN --

# Display brief information about the VT interfaces in physically down state and the causes.

<Sysname> display interface Virtual-Template brief down

Brief information on interface(s) under route mode:

Link: ADM - administratively down; Stby - standby

Interface Link Cause

VT0 DOWN Not connected

VT12 DOWN Not connected

VT1023 DOWN Not connected

Table 5 Command output

Field Descri

tion

Virtual-Template1

Current state

Physical state of the interface. This field for a VT interface can only be

DOWN.

Line protocol state Data link layer state. This field for a VT interface can only be DOWN.

Description Interface description.

Bandwidth Expected bandwidth of the interface.