R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

68
If the access rate setting is changed, the system removes all monitoring and blocking entries, and uses the
new settings to limit PPPoE access rates.
Examples
# Limit the rate at which a user can create PPPoE sessions on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] pppoe-server throttle per-mac 100 100 5
Related commands
display pppoe-server throttled-mac
pppoe-server virtual-template va-pool
Use pppoe-server virtual-template va-pool to configure a VA pool.
Use undo pppoe-server virtual-template va-pool to remove a VA pool.
Syntax
MSR2000/MSR3000:
pppoe-server virtual-template template-number va-pool va-volume
undo pppoe-server virtual-template template-number va-pool
MSR4000:
pppoe-server virtual-template template-number [ slot slot-number ] va-pool va-volume
undo pppoe-server virtual-template template-number [ slot slot-number ] va-pool
Default
No VA pool exists.
Views
System view
Predefined user roles
network-admin
Parameters
virtual-template template-number: Specifies an existing VT interface that uses the VA pool.
va-pool va-volume: Specifies the maximum number of VA interfaces contained in the VA pool, in the
range of 1 to 65534.
slot slot-number total number: Specifies a card on which the regional VA pool is created. The slot-number
argument specifies the card by its slot number. For MSR4000, if you do not specify this option, a global
VA pool is created.
Usage guidelines
The PPPoE server creates a VA interface for a PPPoE session to transmit packets between PPPoE and PPP,
and removes the VA interface when the user goes offline. Creating and removing VA interfaces take time.
A large number of users coming online or going offline degrades the performance of PPPoE session
establishment and termination.