R0106-HP MSR Router Series Layer 2 - WAN Configuration Guide(V7)

[RouterA-isp-bbb] authorization-attribute ip-pool aaa

[RouterA-isp-bbb] quit

# Configure Serial 2/1/0 to authenticate the peer interface in the ISP domain bbb by using PAP.

[RouterA] interface serial 2/1/0

[RouterA-Serial2/1/0] ppp authentication-mode pap domain bbb

# Configure an IP address for Serial 2/1/0.

[RouterA-Serial2/1/0] ip address 200.1.1.1 16

2. Configure Router B:

# Configure the username and password for PAP authentication by Router A.

<RouterB> system-view

[RouterB] interface serial 2/1/0

[RouterB-Serial2/1/0] ppp pap local-user userb password simple 123

# Enable IP address negotiation on Serial 2/1/0.

<RouterB> system-view

[RouterB] interface serial 2/1/0

[RouterB-Serial2/1/0] ip address ppp-negotiate

3. Verify the configuration:

# After the configuration is complete, display summary information about Serial 2/1/0 on Router

[RouterB-Serial2/1/0] display interface serial 2/1/0 brief

Brief information on interface(s) under route mode:

Link: ADM - administratively down; Stby - standby

Protocol: (s) - spoofing

Interface Link Protocol Main IP Description

S2/1/0 UP UP 200.1.1.10

The output shows that Serial 2/1/0 has obtained IP address 200.1.1.10 through PPP negotiation.

# Ping Serial 2/1/0 of Router A from Router B.

[RouterB-Serial2/1/0] ping 200.1.1.1

Ping 200.1.1.1 (200.1.1.1): 56 data bytes, press CTRL_C to break

56 bytes from 200.1.1.1: icmp_seq=0 ttl=128 time=3.197 ms

56 bytes from 200.1.1.1: icmp_seq=1 ttl=128 time=2.594 ms

56 bytes from 200.1.1.1: icmp_seq=2 ttl=128 time=2.739 ms

56 bytes from 200.1.1.1: icmp_seq=3 ttl=128 time=1.738 ms

56 bytes from 200.1.1.1: icmp_seq=4 ttl=128 time=1.744 ms

--- Ping statistics for 200.1.1.1 ---

5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss

round-trip min/avg/max/std-dev = 1.738/2.402/3.197/0.576 ms

The output shows that the ping operation is successful.

# Display the address pools on Serial 2/1/0 of Router A.

[RouterA-Serial2/1/0] display ip pool

Group name: AAA

Pool name Start IP address End IP address Free In use

aaa 200.1.1.10 200.1.1.20 10 1

In use IP addresses:

IP address Interface