R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

113
Field Descri
p
tion
Reason
Reasons for neighbor state changes:
• ResetConnect—The connection is lost due to insufficient memory.
• IntChange—The interface parameter has changed.
• VlinkChange—The virtual link parameter has changed.
• ShamlinkChange—The sham link parameter has changed.
• ResetOspf—The OSPF process is reset.
• UndoOspf—The OSPF process is deleted.
• UndoAres—The OSPF area is deleted.
• UndoNetwork—The interface is disabled.
• SilentInt—The interface is configured as a silent interface.
• IntLogChange—The interface logical attribute has changed.
• IntPhyChange—The interface physical attribute has changed.
• IntVliChange—The virtual link attribute of the interface has changed.
• VlinkDown—The virtual link goes down.
• ShamlinkDown—The sham link goes down.
• DeadExpired—The dead timer expires.
• ConfStubArea—The interface is configured with stub area parameters.
• ConfNssaArea—The interface is configured with NSSA area parameters.
• AuthChange—The authentication type has changed.
• OpaqueChange—The Opaque capability has changed.
• Retrans—Excessive retransmissions.
• LLSChange—LLS capability changes.
• OOBChange—The OOB capability has changed.
• GRChange—The GR capability has changed.
• BFDDown—The interface is shut down by BFD.
• BadLSReq—The interface receives BadLSReq events.
• SeqMismatch—The interface receives SeqNumberMismatch events.
• 1-Way—The interface receives 1-Way events.
Related commands
reset ospf event-log
display ospf fast-reroute lfa-candidate
Use display ospf fast-reroute lfa-candidate to display OSPF FRR backup next hop information.
Syntax
display ospf [ process-id ] [ area area-id ] fast-reroute lfa-candidate
Views
Any view
Predefined user roles
network-admin
network-operator