R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

207
Reservable bandwidth: 0 bytes/sec
Unreserved bandwidth for each TE class:
TE class 0: 0 bytes/sec TE class 1: 0 bytes/sec
TE class 2: 0 bytes/sec TE class 3: 0 bytes/sec
TE class 4: 0 bytes/sec TE class 5: 0 bytes/sec
TE class 6: 0 bytes/sec TE class 7: 0 bytes/sec
TE class 8: 0 bytes/sec TE class 9: 0 bytes/sec
TE class 10: 0 bytes/sec TE class 11: 0 bytes/sec
TE class 12: 0 bytes/sec TE class 13: 0 bytes/sec
TE class 14: 0 bytes/sec TE class 15: 0 bytes/sec
TE cost: 10
Bandwidth constraint model: Prestandard DS-TE RDM
Bandwidth constraints:
BC[0]: 0 bytes/sec BC[1]: 0 bytes/sec
Interface IP address: 192.168.220.20
Neighbor IP address: 192.168.220.10
Router ID 3.3.3.3
0000.0000.0003.00-01 0x00000004 0x7245 887 45 0/0/0
Source 0000.0000.0003.00
+IP-Extended
10.10.10.0 255.255.255.0 Cost: 10
+IP-Extended
192.168.220.0 255.255.255.0 Cost: 10
*-Self LSP, +-Self LSP(Extended), ATT-Attached, P-Partition, OL-Overload
Table 56 Command output
Field Descri
p
tion
LSPID LSP ID.
Seq Num LSP sequence number.
Checksum LSP checksum.
Holdtime LSP lifetime, which decreases as time elapses.
Length LSP length.
ATT/P/OL
• ATT—Attach bit.
• P—Partition bit.
• OL—Overload bit.
1 means the LSP bit is set and 0 means the LSP bit is not set.
Source System ID of the originating router.
NLPID Network layer protocol the originating router runs.
Area address Area address of the originating router.
IPv4 address IP address of the originating router's IS-IS interface.
IPv6 address IPv6 address of the originating router's IS-ISv6 interface.