R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

214
System ID: 0000.0000.0002
Interface: GE2/1/3 Circuit Id: 001
State: Up HoldTime: 27s Type: L1L2 PRI: --
Area address(es): 49
Peer IP address(es): 192.168.220.30
Peer local circuit ID: 1
Peer circuit SNPA address: 000c-29fd-ed69
Uptime: 00:05:07
Adj protocol: IPv4
Adj P2P three-way handshake: Yes
Peer extended circuit ID: 2
Graceful Restart capable
Restarting signal: No
Suppress adjacency advertisement: No
Table 61 Command output
Field Descri
p
tion
System Id System ID of the neighbor.
Interface Interface connecting to the neighbor.
Circuit Id Circuit ID.
State Circuit state.
HoldTime
Within the holdtime, if no hellos are received from the neighbor, the neighbor
is considered down. If a hello is received, the holdtime is reset to the initial
value.
Type
Circuit type:
• L1—Means the circuit type is Level-1 and the neighbor is a Level-1 router.
• L2—Means the circuit type is Level-2 and the neighbor is a Level-2 router.
• L1(L1L2)—Means the circuit type is Level-1 and the neighbor is a Level-1-2
router.
• L2(L1L2)—Means the circuit type is Level-2 and the neighbor is a Level-1-2
router.
PRI DIS priority of the neighbor.
Area Address(es) Area address of the neighbor.
Peer IP Address(es) IP address of the neighbor.
Uptime Time elapsed since the neighbor relationship was formed.
Adj Protocol Adjacency protocol.
Peer local circuit ID Circuit ID of the neighbor.
Peer circuit SNPA address SNPA address of the neighbor.
Adj P2P three-way
handshake
Indicates whether the neighbor supports P2P three-way handshake.
Peer extended circuit ID
Extended circuit ID of the neighbor interface. This field is available when the
neighbor supports three-way handshake.
Graceful Restart capable The neighbor has the GR helper capability.
Restarting signal RR flag.