R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

216
topology topo-name: Specifies a topology by its name, a case-sensitive string of 1 to 31 characters.
Without this option, the command displays redistributed IS-IS routing information for the public network.
ip-address mask-length: Specifies the destination IP address and mask length.
process-id: Specifies the IS-IS process by its ID in the range of 1 to 65535.
level-1: Displays the IS-IS Level-1 routing information.
level-2: Displays the IS-IS Level-2 routing information.
Usage guidelines
If no IS-IS level is specified, this command displays both Level-1 and Level-2 routing information.
Examples
# Display redistributed IPv4 routing information.
<Sysname> display isis redistribute 1
Route information for IS-IS(1)
------------------------------
Level-1 IPv4 Redistribute Table
--------------------------------
Type IPv4 Destination IntCost ExtCost Tag State
--------------------------------------------------------------------------------
D 192.168.30.0/24 0 0 Active
D 11.11.11.11/32 0 0
D 10.10.10.0/24 0 0
Table 63 Command output
Field Descri
p
tion
Route information for IS-IS(1) IS-IS process of the redistributed routing information.
Level-1 IPv4 Redistribute Table Redistributed IPv4 routing information of IS-IS Level-1.
Level-2 IPv4 Redistribute Table Redistributed IPv4 routing information of IS-IS Level-2.
Type
Redistributed route type:
• Direct.
• IS-IS.
• Static.
• OSPF.
• BGP.
• RIP.
IPV4 Destination IPv4 destination address.
IntCost Internal cost of the route.
ExtCost External cost of the route.
Tag Tag value.
State Indicates whether the route is valid.