R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

320
Field Description
Routing policy configured
Routing policy configured for the peer.
If no routing policy is specified, this field displays No routing policy is
configured.
This field does not apply to BGP L2VPN.
# Display the log information of the public BGP IPv4 unicast peer 1.1.1.1 for the active BGP process.
<Sysname> display bgp peer ipv4 1.1.1.1 log-info
Peer : 1.1.1.1
Date Time State Notification
Error/SubError
06-Feb-2013 22:54:42 Down Send notification with error 6/4
Cease/Administrative Reset
<administrative reset>
Table 78 Command output
Field Description
Peer IP or IPv6 address of the peer.
Date Date on which the Notification was sent or received.
Time Time at which the Notification was sent or received.
State
BGP session state:
• Up—The BGP session is in Established state.
• Down—The BGP session is down.
Notification
Error/SubError
Error code of the Notification, indicating the cause of why the BGP session was down.
• Error—Refers to the error code, which identifies the type of the Notification.
• SubError—Refers to the error subcode of the Notification, which identifies the specific
information about the reported error.
display bgp routing-table dampened
Use display bgp routing-table dampened to display dampened BGP routes.
Syntax
display bgp routing-table dampened { ipv4 | ipv6 } { multicast | [ unicast ] [ vpn-instance
vpn-instance-name ] }
Views
Any view
Predefined user roles
network-admin
network-operator