R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

462
display ip policy-based-route setup
Use display ip policy-based-route setup to display PBR configuration.
Syntax
display ip policy-based-route setup
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display PBR configuration.
<Sysname> display ip policy-based-route setup
Policy Name Interface Name
pr01 GigabitEthernet 2/1/1
Table 108 Command output
Field Description
Interface Name Interface where the policy is applied.
Related commands
ip policy-based-route
if-match acl
Use if-match acl to configure an ACL match criterion.
Use undo if-match acl to remove the ACL match criterion.
Syntax
if-match acl { acl-number | name acl-name }
undo if-match acl
Default
No ACL match criterion is configured.
Views
Policy node view
Predefined user roles
network-admin
Parameters
acl-number: Specifies an ACL by its number in the range of 2000 to 2999 for a basic ACL, and in the
range of 3000 to 3999 for an advanced ACL.