R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

650
Use undo routing-table limit to restore the default.
Syntax
routing-table limit number { warn-threshold | simply-alert }
undo routing-table limit
Views
Topology view
Predefined user roles
network-admin
Parameters
number: Specifies the maximum number of active routes supported by the topology.
The following matrix shows the value ranges and default values for the number argument:
Hardware Value ran
g
e Default
MSR2000 1 to 50000 50000
MSR 3000 1 to 100000
MSR3012: 50000
MSR3024/MSR3044/MSR3064: 100000
MSR4000 1 to 100000 100000
warn-threshold: Specifies a warning threshold in the range of 1 to 100 in percentage. When the
percentage of the number of existing active routes to the maximum number of active routes exceeds the
specified threshold, the system generates an alarm message but still allows new active routes. If active
routes in the topology reach the maximum, no more active routes are added.
simply-alert: Enables the topology to add new active routes but generate a system log message when the
maximum number of active routes is exceeded.
Examples
# Configure the maximum number of active routes supported by topology mt1 as 1000. Enable the
topology to add new active routes but generate a system log message when the maximum number of
active routes is exceeded.
<Sysname> system-view
[Sysname] global-address-family ipv4 unicast
[Sysname-global-ipv4] topology mt1
[Sysname-af-topology-mt1] routing-table limit 1000 simply-alert
topology
Use topology to create a topology and enter its view.
Use undo topology to remove the specified topology.
Syntax
topology topo-name
undo topology topo-name