R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

167
Ste
p
Command Remarks
9. Enable IS-IS for the
specified topology on
the interface.
isis topology enable
By default, IS-IS is disabled for the
topology.
Displaying and maintaining IS-IS
Execute display commands in any view and the reset command in user view.
Task Command
Display IS-IS process information
(MSR2000/MSR3000).
display isis [ process-id ]
Display IS-IS backup process information
(MSR4000).
display isis [ process-id ] [ standby slot slot-number ]
Display IS-IS GR log information
(MSR2000/MSR3000).
display isis graceful-restart event-log
Display IS-IS GR log information
(MSR4000).
display isis graceful-restart event-log slot slot-number
Display the IS-IS GR status. display isis graceful-restart status [ level-1 | level-2 ] [ process-id ]
Display IS-IS interface information
(MSR2000/MSR3000).
display isis interface [ [ interface-type interface-number ] [ verbose ]
| statistics ] [ process-id ]
Display IS-IS backup interface
information (MSR4000).
display isis interface [ interface-type interface-number ] [ verbose ]
[ process-id ] [ standby slot slot-number ]
Display IS-IS LSDB information
(MSR2000/MSR3000).
display isis lsdb [ [ level-1 | level-2 ] | local | lsp-id lspid |
[ lsp-name lspname ] | verbose ] * [ process-id ]
Display IS-IS backup LSDB information
(MSR4000).
display isis lsdb [ [ level-1 | level-2 ] | local | [ lsp-id lspid |
lsp-name lspname ] | verbose ] * [ process-id ] [ standby slot
slot-number ]
Display IS-IS mesh group information. display isis mesh-group [ process-id ]
Display the host name to system ID
mapping table.
display isis name-table [ process-id ]
Display IS-IS NSR log information
(MSR4000).
display isis non-stop-routing event-log slot slot-number
Display IS-IS NSR status. display isis non-stop-routing status
Display IS-IS neighbor information
(MSR2000/MSR3000).
display isis peer [ statistics | verbose ] [ process-id ]
Display IS-IS backup neighbor
information (MSR4000).
display isis peer [ statistics | verbose ] [ process-id ] [ standby slot
slot-number ]
Display IS-IS redistributed route
information
display isis redistribute [ ipv4 [ topology topo-name ] [ ip-address
mask-length ] ] [ level-1 | level-2 ] [ process-id ]
Display IS-IS IPv4 routing information.
display isis route [ ipv4 [ topology topo-name ] [ ip-address
mask-length ] ] [ [ level-1 | level-2 ] | verbose ] * [ process-id ]