R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

93
Parameters
number: Specifies the maximum number of DHCP snooping entries for an interface to learn. The value
range is 1 to 4294967295.
Examples
# Set the maximum number of DHCP snooping entries for the Layer 2 Ethernet interface GigabitEthernet
2/1/1 to learn to 1000.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] dhcp snooping max-learning-num 1000
dhcp snooping trust
Use dhcp snooping trust to configure a port as a trusted port.
Use undo dhcp snooping trust to restore the default state of a port.
Syntax
dhcp snooping trust
undo dhcp snooping trust
Default
After you enable DHCP snooping, all ports are untrusted.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
Specify the ports facing the DHCP server as trusted ports and specify the other ports as untrusted ports
so DHCP clients can obtain valid IP addresses.
Examples
# Specify the Layer 2 Ethernet interface GigabitEthernet 2/1/1 as a trusted port.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] dhcp snooping trust
Related commands
display dhcp snooping trust
display dhcp snooping binding
Use display dhcp snooping binding to display DHCP snooping entries.
Syntax
display dhcp snooping binding [ ip ip-address [ vlan vlan-id ] ]
Views
Any view