R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

134
202.110.10.40 202.110.10.50
Address group 4:
Port range: 10001-65535
Port block size: 500
Extended block number: 1
Address information:
Start address End address
202.110.10.60 202.110.10.65
Address group 6:
Address information:
Start address End address
--- ---
# Display information about NAT address group 1.
<Sysname> display nat address-group 1
Address group 1:
Address information:
Start address End address
202.110.10.10 202.110.10.15
Table 28 Command output
Field Descri
p
tion
Address group Number of the NAT address group.
Port range
Port range for public IP addresses. This field is not displayed if the port
range is not configured.
Block size
Number of ports in a port block. This field is not displayed if the port block
size is not set.
Extended block number
Number of extended port blocks. This field is not displayed if the number of
extended port blocks is not set.
Address information Information about the public IP addresses in the address group.
Start address
Start IP address of a group member. If you do not specify any start address
for the member, this field displays hyphens (---).
End address
End IP address of a group member. If you do not specify any end address
for the member, this field displays hyphens (---).
Related commands
nat address-group
display nat dns-map
Use display nat dns-map to display NAT with DNS mapping configuration.
Syntax
display nat dns-map