R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

138
Field Descri
p
tion
Address group
NAT address group used by inbound dynamic NAT rule. If no NAT address
group is used, the field displays hyphens (---).
Add route
Whether to add a route when a packet matches the inbound dynamic NAT
rule.
NO-PAT
Whether NO-PAT or PAT is used:
• Y—NO-PAT is used.
• N—PAT is used.
Reversible Whether reverse address translation is allowed.
VPN instance
MPLS L3VPN instance to which the NAT address group belongs. If the group
does not belong to any VPN, the field is not displayed.
Related commands
nat inbound
display nat log
Use display nat log to display NAT logging configuration.
Syntax
display nat log
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display NAT logging configuration.
<Sysname> display nat log
NAT logging:
Log enable : Enabled(ACL 2000)
Flow-begin : Disabled
Flow-end : Disabled
Flow-active : Enabled(10 minutes)
Port-block-assign : Disabled
Port-block-withdraw : Disabled
Alarm : Disabled
Table 32 Command output
Field Descri
p
tion
NAT logging NAT logging configuration.
Log enable
Whether NAT logging is enabled.
If an ACL is specified for NAT logging, this field also displays the ACL
number.