R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

144
Field Descri
p
tion
Port block Port block defined by a start port and an end port.
Connections Number of connections established by using the ports in the port block.
display nat port-block-group
Use display nat port-block-group to display information about NAT port block groups.
Syntax
display nat port-block-group [ group-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-number: Specifies the ID of a port block group. The value range is 0 to 65535. If you do not
specify this argument, the command displays information about all port block groups.
Examples
# Display information about all port block groups.
<Sysname> display nat port-block-group
NAT port block group information:
There are 3 NAT port block groups.
Port block group 1:
Port range: 1-65535
Block size: 256
Local IP address information:
Start address End address VPN instance
172.16.1.1 172.16.1.254 ---
192.168.1.1 192.168.1.254 vpna
192.168.3.1 192.168.3.254 vpna
Global IP pool information:
Start address End address
201.1.1.1 201.1.1.10
201.1.1.21 201.1.1.25
Port block group 2:
Port range: 10001-30000
Block size: 500
Local IP address information:
Start address End address VPN instance
10.1.1.1 10.1.10.255 vpnb
Global IP pool information:
Start address End address