R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

173
Parameters
protocol pro-type: Specifies a protocol type. If the protocol is not TCP or UDP, NAT Server is configured
without port information. The protocol type format can be one of the following:
• A number in the range of 1 to 255.
• A protocol name of icmp, tcp, or udp.
global-address: Specifies the external address of an internal server.
global-address1 global address2: Specifies an external address pool, which can include a maximum
number of 255 addresses. The global-address1 argument specifies the start address, and global
address2 specifies the end address that must be greater than the start address.
current-interface: Enables Easy IP on the current interface. The IP address of the interface is used as the
NAT address for the internal server.
interface interface-type interface-number: Enables Easy IP on the interface specified by its type and
number. The IP address of the interface is used as the NAT address for the internal server. Only loopback
interfaces are supported.
global-port1 global-port2: Specifies an external port number range, which can include a maximum of
255 ports. The global-port1 argument specifies the start port, and global-port2 specifies the end port that
must be greater than the start port. The external port number format can be one of the following:
• A number in the range of 1 to 65535. Both the start port and the end port support this format.
• A protocol name, a string of 1 to 15 characters. For example, http and telnet. Only the start port
supports this format.
local-address1 local-address2: Specifies a consecutive internal IP address pool. The local-address1
argument specifies the start address, and local-address2 specifies the end address that must be greater
than the start address. The number of addresses in the range must match that of the external port number
range.
local-port: Specifies the local port number. The local port number format can be one of the following:
• A number in the range of 1 to 65535. Both the start port and the end port support this format. To
specify all types of services, set the port number to 0. This is the same as configuring a static
translation between the global-address and local-address.
• A protocol name, a string of 1 to 15 characters. For example, http and telnet.
global-port: Specifies the external port number. The default value and value range are the same as
defined in local-port.
local-address: Specifies the local IP address.
vpn-instance global-name: Specifies the MPLS L3VPN instance to which the advertised external IP
address belongs. The global-name ar
gument is a case-sensitive string of 1 to 31 characters. To specify a
public IP address, do not use this option.
vpn-instance local-name: Specifies the MPLS L3VPN instance to which the internal server belongs. The
local-name argument is a case-sensitive string of 1 to 31 characters. To specify a public IP address, do
not use this parameter.
server-group group-number: Specifies the internal server group to which the internal server belongs.
With this parameter, the load sharing NAT Server feature is configured. The group-number argument
specifies the internal server group number in the range of 0 to 65535.
acl acl-number: Specifies an ACL number in the range of 2000 to 3999. If you specify an ACL, only
packets permitted by the ACL can be translated by using the mapping.