R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

192
ip fast-forwarding load-sharing
Use ip fast-forwarding load-sharing to enable fast-forwarding load sharing.
Use undo ip fast-forwarding load-sharing to disable fast-forwarding load sharing.
Syntax
ip fast-forwarding load-sharing
undo ip fast-forwarding load-sharing
Default
Fast-forwarding load sharing is enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Fast-forwarding load sharing creates an entry for a data flow after the first packet of the flow is
forwarded through the routing table. It uses the entry to forward subsequent packets of the flow and can
reduce route lookup time and improve forwarding efficiency.
When fast-forwarding load sharing is enabled, the debugging ip packet command does not take effect,
and no IP packet debugging information is output.
Examples
# Enable fast-forwarding load sharing.
<Sysname> system-Views
[Sysname] ip fast-forwarding load-sharing
Related commands
• display ip fast-forwarding cache
• display ip fast-forwarding fragcache
• reset ip fast-forwarding cache
ip fast-forwarding aging-time
Use ip fast-forwarding aging-time to configure the aging time of fast forwarding entries.
Use undo ip fast-forwarding aging-time to restore the default.
Syntax
ip fast-forwarding aging-time aging-time
undo ip fast-forwarding aging-time
Default
The aging time of fast forwarding entries is 30 seconds.
Views
System view