R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

246
IPv6 Address: FE80::200:5EFF:FE32:B800
Link layer : 0000-5e32-b800 VID : N/A Interface: GE2/1/1
State : REACH Type: IS Age : -
Vpn-instance: vpn1
Table 61 Command output
Field Descri
p
tion
IPv6 Address IPv6 address of a neighbor.
Link Layer Link layer address (MAC address) of a neighbor.
VID VLAN to which the interface connected with a neighbor belongs.
Interface Interface connected with a neighbor.
State
State of a neighbor:
• INCMP—The address is being resolved. The link layer address of the neighbor is
unknown.
• REACH—The neighbor is reachable.
• STALE—Whether the neighbor is reachable is unknown. The device does not verify the
reachability any longer unless data is sent to the neighbor.
• DELAY—Whether the neighbor is reachable is unknown. The device sends an NS
message after a delay.
• PROBE—Whether the neighbor is reachable is unknown. The device sends an NS
message to verify the reachability of the neighbor.
Type
Neighbor information type:
• S—Statically configured.
• D—Dynamically obtained.
• O—Learned from the OpenFlow module.
• I—Invalid.
Age
A hyphen (-) indicates a static entry.
For a dynamic entry, this field displays the elapsed time in seconds. If the neighbor is never
reachable, this field displays a pound sign (#).
Vpn-instance Name of a VPN or [No Vrf] with no VPN configured.
Related commands
• ipv6 neighbor
• reset ipv6 neighbors
display ipv6 neighbors count
Use display ipv6 neighbors count to display the number of neighbor entries.
Syntax
MSR2000/MSR3000:
display ipv6 neighbors { all | dynamic | interface interface-type interface-number | static | vlan vlan-id }
count
MSR4000: