R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

314
Use undo ipv6 dhcp option-group to delete the specified static DHCPv6 option group.
Syntax
ipv6 dhcp option-group option-group-number
undo ipv6 dhcp option-group option-group-number
Default
No DHCPv6 option group exists on the device.
Views
System view
Predefined user roles
network-admin
Parameters
option-group-number: Assigns an ID to the static option group, in the range of 1 to 100.
Usage guidelines
A static DHCPv6 option group can use the same ID as a dynamic DHCPv6 option group. If a static
DHCPv6 option group and a dynamic DHCPv6 option group use the same ID, the static one takes
precedence over the dynamic one.
Examples
# Create static DHCPv6 option group 1 and enter its view.
<Sysname> system-view
[Sysname] ipv6 dhcp option-group 1
[Sysname-dhcp6-option-group1]
Related commands
display ipv6 dhcp option-group
ipv6 dhcp pool
Use ipv6 dhcp pool to create a DHCPv6 address pool and enter its view. If the pool has been created,
you directly enter its view.
Use undo ipv6 dhcp pool to remove the specified DHCPv6 address pool.
Syntax
ipv6 dhcp pool pool-name
undo ipv6 dhcp pool pool-name
Default
No DHCPv6 address pool is configured.
Views
System view
Predefined user roles
network-admin