R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

329
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you do not
specify an interface, the command displays DHCPv6 server addresses on all interfaces enabled with
DHCPv6 relay agent.
Examples
# Display DHCPv6 server addresses on all interfaces enabled with DHCPv6 relay agent.
<Sysname> display ipv6 dhcp relay server-address
Interface: GigabitEthernet2/1/1
Server address Outgoing Interface
2::3
3::4 GigabitEthernet2/1/3
Interface: GigabitEthernet2/1/2
Server address Outgoing Interface
2::3
3::4 GigabitEthernet2/1/3
# Display DHCPv6 server addresses on GigabitEthernet 2/1/1.
<Sysname> display ipv6 dhcp relay server-address interface gigabitethernet 2/1/1
Interface: GigabitEthernet2/1/1
Server address Outgoing Interface
2::3
3::4 GigabitEthernet2/1/3
Table 80 Command output
Field Descri
p
tion
Server address DHCPv6 server address specified on the DHCP relay agent.
Outgoing Interface
Output interface of DHCPv6 packets. If no output interface is specified,
the device searches the routing table for the output interface.
Related commands
• ipv6 dhcp relay server-address
• ipv6 dhcp select
display ipv6 dhcp relay statistics
Use display ipv6 dhcp relay statistics to display DHCPv6 packet statistics on the DHCPv6 relay agent.
Syntax
display ipv6 dhcp relay statistics [ interface interface-type interface-number ]