R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

53
h-node: Specifies the hybrid node. An h-node client unicasts the destination name to a WINS server. If
it does not receive a response, the h-node client broadcasts the destination name to get the mapping from
a server.
m-node: Specifies the mixed node. An m-node client broadcasts the destination name. If it does not
receive a response, the m-node client unicasts the destination name to the WINS server to get the
mapping.
p-node: Specifies the peer-to-peer node. A p-node client sends the destination name in a unicast
message to get the mapping from the WINS server.
Usage guidelines
If you use the command multiple times, the most recent configuration takes effect.
Examples
# Specify the NetBIOS node type as p-node in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] netbios-type p-node
Related commands
• display dhcp server pool
• nbns-list
network
Use network to specify the subnet for dynamic allocation in a DHCP address pool.
Use undo network to remove the specified subnet.
Syntax
network network-address [ mask-length | mask mask ] [ secondary ]
undo network network-address [ mask-length | mask mask ] [ secondary ]
Default
No subnet is specified in an address pool.
Views
DHCP address pool view
Predefined user roles
network-admin
Parameters
network-address: Specifies the subnet for dynamic allocation. If no mask length or mask is specified, the
natural mask will be used.
mask-length: Specifies the mask length in the range of 1 to 30.
mask mask: Specifies the mask in dotted decimal format.
secondary: Specifies the subnet as a secondary subnet. If you do not specify this keyword, this command
specifies the primary subnet. If the addresses in the primary subnet are used up, the DHCP server can
select addresses from a secondary subnet for clients.