R0106-HP MSR Router Series MPLS Command Reference(V7)

95
display ospf mpls te network
Use display ospf mpls te network to display network information in an OSPF TEDB.
Syntax
display ospf [ process-id ] [ area area-id ] mpls te network [ originate-router advertising-router-id |
self-originate ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process ID in the range of 1 to 65535. If you do not specify this argument,
this command displays information about all OSPF processes.
area area-id: Specifies an area by its ID, an IP address or a decimal integer, in the range of 0 to
4294967295. If you specify an integer, the system will translate the integer into the IP address format. If
you do not specify this option, this command displays information about all areas.
originate-router advertising-router-id: Displays information originated from a router specified by its router
ID.
self-originate: Displays information generated by the local router.
Examples
# Display network information for all processes in all areas.
<Sysname> display ospf mpls te network
OSPF Process 1 with Router ID 12.1.1.1
Traffic Engineering Network
Area: 0.0.0.0
Adv Router ID : 1.1.1.1
Designated Router : 197.168.1.1
Flags : -/U/-
Attached Router 2.2.2.2
Attached Router 1.1.1.1
Table 36 Command output
Field Descri
p
tion
Adv Router ID ID of the router that advertises the information.
Designated Router IP address of the designated router.