R0106-HP MSR Router Series MPLS Command Reference(V7)

97
Field Descri
p
tion
State
Tunnel interface states:
• Inactive—The tunnel interface is not used to forward packets, because
the tunnel route is not the optimal route.
• Active—The tunnel interface is used to forward packets, because the
tunnel route is the optimal route.
Neighbor ID Router ID for the tunnel destination.
Cost Route cost of the tunnel interface.
Destination LSR ID for the tunnel destination.
Auto Route
Automatic route advertisement method, IGP Shortcut or IGP Advertise.
IGP Advertise indicates that forwarding adjacency is enabled.
Metric Absolute or relative metric of the MPLS TE tunnel.
display tunnel-bundle
Use display tunnel-bundle to display information about tunnel bundle interfaces and their member
interfaces.
Syntax
display tunnel-bundle [ number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
number: Specifies a tunnel bundle interface and its member interfaces by the tunnel bundle interface
number. If you do not specify this argument, the command displays information about all tunnel bundle
interfaces and their member interfaces.
Examples
# Display information about all tunnel bundle interfaces and their member interfaces.
<Sysname> display tunnel-bundle
Total number of tunnel bundles: 1, 1 up, 0 down
Tunnel bundle name: Tunnel-Bundle 1
Bundle state : Up
Bundle attributes :
Working mode : Load Balancing
Tunnel type : CR-LSP
Tunnel destination : 2.2.2.2
Bundle members:
Member State Load-share
Tunnel2 Up 2