R0106-HP MSR Router Series MPLS Command Reference(V7)

138
Views
Tunnel interface view
Predefined user roles
network-admin
Parameters
lsp-name: Specifies a static CRLSP by its name, a case-sensitive string of 1 to 15 characters.
Usage guidelines
This command takes effect only when the mpls te signaling static command has been configured in
tunnel interface view.
Execute this command on the ingress node. The static CRLSP specified must have been created by using
the static-cr-lsp ingress command.
Examples
# Configure tunnel 0 to reference static CRLSP named static-te-3.
<Sysname> system-view
[Sysname] interface tunnel 0 mode mpls-te
[Sysname-Tunnel0] mpls te static-cr-lsp static-te-3
Related commands
• display mpls te tunnel-interface
• mpls te signaling
• static-cr-lsp egress
• static-cr-lsp ingress
• static-cr-lsp transit
mpls te timer retry
Use mpls te timer retry to configure the tunnel setup retry interval.
Use undo mpls te timer retry to restore the default.
Syntax
mpls te timer retry seconds
undo mpls te timer retry
Default
The retry interval is 2 seconds.
Views
Tunnel interface view
Predefined user roles
network-admin
Parameters
seconds: Specifies the interval at which MPLS TE tries to reestablish the tunnel, in the range of 1 to
604800 seconds.