R0106-HP MSR Router Series MPLS Command Reference(V7)

142
• mpls te path-metric-type
reset mpls te auto-bandwidth-adjustment timers
Use reset mpls te auto-bandwidth-adjustment timers to reset the automatic bandwidth adjustment
function.
Syntax
reset mpls te auto-bandwidth-adjustment timers
Views
User view
Predefined user roles
network-admin
Usage guidelines
After this command is executed, the system clears the output rate sampling information and the
remaining time to the next bandwidth adjustment. Then it starts new output rate sampling and bandwidth
adjustment.
Examples
# Reset the automatic bandwidth adjustment function.
<Sysname> reset mpls te auto-bandwidth-adjustment timers
Related commands
• mpls te auto-bandwidth
• auto-bandwidth enable
snmp-agent trap enable te
Use snmp-agent trap enable te to enable SNMP notifications for MPLS TE.
Use undo snmp-agent trap enable te to disable SNMP notifications for MPLS TE.
Syntax
snmp-agent trap enable te
undo snmp-agent trap enable te
Default
SNMP notifications for MPLS TE are enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command enables generating SNMP notifications for MPLS TE upon the MPLS TE tunnel status
changes, as defined in RFC 3812. The generated SNMP notifications are sent to the SNMP module.