R0106-HP MSR Router Series MPLS Command Reference(V7)

148
In-Label : Null
Out-Label : 60
Out-Interface : GE2/1/1
Nexthop : 20.1.1.2
Class Type : CT0
Bandwidth : 0 kbps
LSP State : Up
Table 41 Command output
Field Descri
p
tion
LSP Name Name of the static CRLSP.
LSR Type
LSR type of the local node on the static CRLSP: Ingress, Transit, or
Egress.
In-Label Incoming label.
Out-Label Outgoing label.
Out-Interface Output interface.
Nexthop Next hop address.
Class Type Class type of the static CRLSP: CT 0, CT 1, CT 2, or CT 3.
Bandwidth Bandwidth required by the static CRLSP, in kbps.
LSP State
Current state of the static CRLSP:
• Down—The static CRLSP is not available.
• Up—The static CRLSP is available.
• Idle—The incoming label of the static CRLSP is not available.
• Duplicate—The incoming label of the static CRLSP is being used by
a static LSP or a static PW.
Related commands
• static-cr-lsp egress
• static-cr-lsp ingress
• static-cr-lsp transit
static-cr-lsp egress
Use static-cr-lsp egress to configure the egress node of a static CRLSP.
Use undo static-cr-lsp egress to delete the egress node configuration of the static CRLSP.
Syntax
static-cr-lsp egress lsp-name in-label in-label-value
undo static-cr-lsp egress lsp-name
Default
No static CRLSP exists on the device.
Views
System view