R0106-HP MSR Router Series MPLS Command Reference(V7)

176
Field Descri
p
tion
Previous hop LIH Logical interface handle of the previous hop.
QoS service QoS service type: Controlled-Load or Guaranteed.
Received message Epoch Value of the Epoch field in the Message ID object of the received message.
Received message ID Message ID in the received message.
Sent message epoch Value of the Epoch field in the Message ID object of the sent message.
Sent message ID Message ID in the sent message.
In-Interface Incoming interface of the message.
Local LIH Local logical interface handle.
Local address IP address of the outgoing interface of the Path message.
Refresh interval Refresh interval for Path and Resv messages, in milliseconds.
Out-Interface Outgoing interface of the message.
Unknown object number Number of unknown objects.
Received ERO number
Number of received Explicit Route Objects (EROs) and the ERO information.
ERO information includes the addresses of the nodes on the explicit path,
and whether the current node is a loose or strict next hop.
Sent ERO number
Number of sent EROs and the ERO information.
ERO information includes the addresses of the nodes on the explicit path,
and whether the current node is a loose or strict next hop.
XRO number
Number of Exclude Route Objects (XROs).
If the number is not 0, the subsequent output displays the IP addresses in the
XROs.
The IP addresses are the addresses of interfaces or the LSR IDs of the nodes
that are to be excluded from routes. The addresses in the XROs are
non-sequenced.
RRO number
Number of Record Route Objects (RROs).
If the number is not 0, the subsequent output displays the IP addresses or
labels recorded in the RROs.
The RRO information is displayed only when route recording is configured
on the tunnel interface.
Flag
Flag value and its meaning in an RRO:
• No FRR—FRR is not configured.
• FRR Avail—FRR is available.
• In use—FRR has occurred.
• BW—Bandwidth protection.
• Node-Prot—Node protection.
• Node-ID—The IP address in the RRO is the LSR ID of the node.
• In-Int—The IP address in the RRO is that of the incoming interface.
• Global label—Per-platform label space.