R0106-HP MSR Router Series MPLS Command Reference(V7)

183
undo keep-multiplier
Default
The PSB and RSB timeout multiplier is 3.
Views
RSVP view
Predefined user roles
network-admin
Parameters
number: Specifies the PSB and RSB timeout multiplier in the range of 3 to 255.
Usage guidelines
The PSB and RSB timeout is computed in this formula: Timeout = (keep-multiplier+0.5) × 1.5 × refresh-time.
Refresh-time is the interval at which the peer device advertises the Path and Resv messages to the local
device.
To prevent too many PSBs and RSBs from occupying system resources, the device removes a PSB or RSB
if no Path or Resv message is received within the timeout interval.
Examples
# Set the PSB and RSB timeout multiplier to 5.
<Sysname> system-view
[Sysname] rsvp
[Sysname-rsvp] keep-multiplier 5
Related commands
refresh interval
peer
Use peer to create an RSVP authentication neighbor and enter RSVP neighbor view.
Use undo peer to delete the specified RSVP authentication neighbor.
Syntax
peer ip-address
undo peer ip-address
Default
The device does not have any RSVP authentication neighbors.
Views
RSVP view
Predefined user roles
network-admin
Parameters
ip-address: Specifies an RSVP authentication neighbor by its IP address.