R0106-HP MSR Router Series MPLS Command Reference(V7)

205
Field Descri
p
tion
Status Route status codes. See Table 62.
Origin Route origin codes. See Table 62.
In/Out Label Incoming/outgoing label.
display bgp routing-table ipv4 unicast outlabel
Use display bgp routing-table ipv4 unicast outlabel to display outgoing labels for BGP IPv4 unicast
routes.
Syntax
MSR2000/MSR3000:
display bgp routing-table ipv4 [ unicast ] [ vpn-instance vpn-instance-name ] outlabel
MSR4000:
display bgp routing-table ipv4 [ unicast ] [ vpn-instance vpn-instance-name ] outlabel [ standby slot
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies a VPN instance by its name, a case-sensitive string of 1 to 31
characters. If you do not specify any VPN instance, this command displays outgoing labels for BGP IPv4
unicast routes on the public network.
standby: Displays BGP IPv4 unicast route outgoing labels for a standby BGP process. If you do not
specify a standby BGP process, the command displays information for the active BGP process.
slot slot-number: Specifies the slot number of the card where the standby process resides. (MSR4000.)
Usage guidelines
The active BGP process backs up BGP peers and routing information to the standby BGP process only
when BGP NSR is enabled. If BGP NSR is disabled, this command does not display anything when you
execute it with the standby keyword.
The unicast keyword does not affect the command output.
Examples
# Display outgoing labels for all public BGP IPv4 unicast routes for the active process.
<Sysname> display bgp routing-table ipv4 outlabel
Total number of routes: 1
BGP local router ID is 3.3.3.9
Status codes: * - valid, > - best, d - dampened, h - history,