R0106-HP MSR Router Series MPLS Command Reference(V7)

275
Tunnel Group ID : 0x60000000
Tunnel NHLFE IDs: 1025
Link ID: 1
PW Type : VLAN PW State : Up
In Label : 1278 Out Label: 1151
MTU : 1500
PW Attributes : Main
VCCV CC : Router-Alert
VCCV BFD : Fault Detection with BFD
Tunnel Group ID : 0x160000001
Tunnel NHLFE IDs: 1027
Table 87 Command output
Field Descri
p
tion
PW State
PW state: Up, Down, Blocked, or BFD Defect.
Blocked indicates that the PW is a backup PW. BFD Defect indicates BFD has
detected a defect on the PW.
PW Attributes
PW attribute:
• Main—The PW is the primary PW.
• Backup—The PW is the backup PW.
VCCV CC
VCCV CC type:
• Control word.
• Route alert.
• TTL.
VCCV BFD
VCCV BFD type:
• Fault Detection with BFD. BFD packets use IP/UDP encapsulation (with IP/UDP
Headers).
• Fault Detection with Raw-BFD. BFD packets use PW-ACH encapsulation
(without IP/UDP Headers).
Tunnel Group ID ID of the tunnel group for the PW.
Tunnel NHLFE IDs
NHLFE IDs of the public tunnels that carry the PW.
If equal-cost tunnels are available, this field displays multiple tunnel NHLFE IDs.
If no tunnel is available, this field displays None.
display l2vpn interface
Use display l2vpn interface to display L2VPN information for Layer 3 interfaces bound to cross-connects.
Syntax
display l2vpn interface [ xconnect-group group-name | interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin