R0106-HP MSR Router Series MPLS Command Reference(V7)

310
100 bytes from 100.1.2.1: Sequence=3 time=60 ms Return Code=3(1)
Destination address 127.0.0.3
100 bytes from 100.1.2.1: Sequence=4 time=60 ms Return Code=3(1)
Destination address 127.0.0.1
100 bytes from 100.1.2.1: Sequence=5 time=76 ms Return Code=3(1)
Destination address 127.0.0.3
100 bytes from 100.1.2.1: Sequence=6 time=57 ms Return Code=3(1)
--- Ping statistics for FEC 3.3.3.9/32 ---
6 packets transmitted, 6 packets received, 0.0% packet loss
Round-trip min/avg/max = 44/57/76 ms
Table 96 Command output
Field Descri
p
tion
MPLS Ping FEC: 3.3.3.9/32 : 100 data bytes
Verify LSP connectivity for FEC 3.3.3.9/32 by sending
100-byte MPLS echo requests.
Destination address Destination IP address in the IP header.
100 bytes from 100.1.2.1 Received a 100-byte reply from 100.1.2.1.
Sequence
Sequence number of the reply, for determination of packet
loss, disorder, or duplicate.
time Packet round-trip delay.
Return Code
Return code. The number in parentheses represents a return
subcode.
Ping statistics for FEC 3.3.3.9/32 LSP verification statistics.
packets transmitted Number of MPLS echo requests sent.
packets received Number of MPLS echo replies received.
packet loss Percentage of unreplied packets to total request packets.
Round-trip min/avg/max Minimum, average, and maximum round-trip delay.
ping mpls pw
Use ping mpls pw to verify LDP PW or static PW connectivity.
Syntax
ping mpls [ -a source-ip | -c count | -exp exp-value | -h ttl-value | -m wait-time | -r reply-mode | -rtos
tos-value | -s packet-size | -t time-out | -v ] * pw ip-address pw-id pw-id
Views
Any view
Predefined user roles
network-admin