R0106-HP MSR Router Series MPLS Command Reference(V7)

322
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
number: Specifies the number of an existing tunnel bundle interface.
brief: Displays brief interface information. If you do not specify this keyword, this command displays
detailed interface information.
description: Displays complete interface descriptions. If you do not specify this keyword, this command
displays only the first 27 characters of interface descriptions.
down: Displays information about interfaces in the physical state of DOWN and the causes. If you do not
specify this keyword, this command displays information about interfaces in all states.
Usage guidelines
If you do not specify the tunnel-bundle keyword, this command displays information about all interfaces
on the device.
If you specify the tunnel-bundle keyword without the number argument, this command displays
information about all existing tunnel bundle interfaces.
Examples
# Display detailed information about interface Tunnel-Bundle 100.
<Sysname> display interface tunnel-bundle 100
Tunnel-Bundle100
Current state: UP
Line protocol state: UP
Description: Tunnel-Bundle100 Interface
Bandwidth: 64kbps
Maximum Transmit Unit: 1500
Internet protocol processing: disabled
Tunnel-Bundle destination unknown
Tunnel type: CRLSP
Last clearing of counters: Never
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Input: 0 packets, 0 bytes, 0 drops
Output: 0 packets, 0 bytes, 0 drops
Table 98 Command output
Field Descri
p
tion
Tunnel-Bundle100 Information about the tunnel bundle interface Tunnel-Bundle 100.