R0106-HP MSR Router Series MPLS Command Reference(V7)

330
Examples
# Display information about all tunnel bundle interfaces and their member interfaces.
<Sysname> display tunnel-bundle
Total number of tunnel bundles: 1, 1 up, 0 down
Tunnel bundle name: Tunnel-Bundle 2
Bundle state : Up
Bundle attributes :
Working mode : 1:1
Tunnel type : CR-LSP
Tunnel destination : 3.3.3.3
Bundle members:
Member State Role
Tunnel4 Up Working
Tunnel5 Up Protection
Table 103 Command output
Field Descri
p
tion
Total number of tunnel bundles Total number of tunnel bundle interfaces in up and down states.
Working mode
Tunnel bundle interface operating modes:
• Load Balancing.
• 1+1—1+1 protection switching mode.
• 1:1—1:1 protection switching mode.
For more information about 1+1 and 1:1 protection switching modes, see
MPLS Configuration Guide.
Tunnel type The tunnel type can only be CRLSP.
Tunnel destination Tunnel destination address of the tunnel bundle interface.
Role
Role of a member interface:
• Working—The tunnel for the member interface is the working tunnel.
• Protection—The tunnel for the member interface is the protection
tunnel.
interface tunnel-bundle protection
Use interface tunnel-bundle protection to create a tunnel bundle interface in protection switching mode,
and enter the tunnel bundle interface view.
Use undo interface tunnel-bundle to delete a tunnel bundle interface.
Syntax
interface tunnel-bundle number [ protection { oneplusone | onetoone } ]
undo interface tunnel-bundle number
Default
No tunnel bundle interface exists on a device.