R0106-HP MSR Router Series MPLS Command Reference(V7)

37
Received : 3
Table 14 Command output
Field Descri
p
tion
FECs
Number of FECs that LDP has discovered from the routing
protocol or FEC-label mappings advertised by peers.
Implicit Null Number of FECs that are bound to the implicit null label.
Explicit Null Number of FECs that are bound to the explicit null label.
Non-Null Number of FECs that are bound to non-null labels.
No Label Number of FECs without a label.
No Route Number of FECs without matching routes.
Sent Number of label mappings sent and being sent.
Received Number of label mappings accepted.
display mpls ldp igp sync
Use display mpls ldp igp sync to display LDP-IGP synchronization information.
Syntax
display mpls ldp igp sync [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you do not
specify any interface, this command displays LDP-IGP synchronization information for all interfaces.
Example
# Display LDP-IGP synchronization information for all interfaces.
<Sysname> display mpls ldp igp sync
GigabitEthernet2/0/2:
IGP protocols: OSPF
Sync status: Ready
Peers:
10.1.1.2:0
GigabitEthernet2/0/6:
IGP protocols: OSPF, IS-IS
Sync status: Delayed (24 sec remaining)
Peers:
20.1.1.2:0