R0106-HP MSR Router Series MPLS Command Reference(V7)

38
GigabitEthernet2/0/8:
LDP-IGP synchronization is disabled on the interface
Table 15 Command output
Field Descri
p
tion
IGP protocols IGP protocols that require LDP-IGP synchronization: OSPF and IS-IS.
Sync status
LDP-IGP synchronization state:
• Ready—LDP is converged and is available for IGP.
• Delayed—LDP is waiting to notify IGP of the convergence.
remaining indicates the remaining time for the delay, in seconds.
• Not ready—LDP is not converged and is not available for IGP.
• LDP not enabled—LDP is not enabled on the interface.
Peers LDP peer that completes LDP convergence on the interface.
display mpls ldp interface
Use display mpls ldp interface to display LDP interface information.
Syntax
display mpls ldp interface [ vpn-instance vpn-instance-name ] [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. The command displays LDP interface information for the specified VPN. If you do
not specify a VPN instance, the command displays LDP interface information for the public network.
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an
interface, this command displays information about all LDP interfaces.
Examples
# Display information about all LDP interfaces for the public network.
<Sysname> display mpls ldp interface
Interface MPLS LDP Auto-config
GE2/0/2 Enabled Configured -
GE2/0/6 Enabled Configured -
Table 16 Command output
Field Descri
p
tion
Interface Interface enabled with LDP.
MPLS Whether the interface is enabled with MPLS.
LDP Whether the interface is configured with the mpls ldp enable command.